Skip to content

Endgame espresso setup

The Endgame espresso setup is the Timemore Sculptor 078S, the La Marzocco Linea Micra, and the Acaia Lunar, for about €5,124 in all. Bought at the cheapest or the dearest shop we list, it runs €4,693 to €5,406, from 17 shop prices checked 4 to 18 November 2026. The Timemore Sculptor 078S price rests on one shop.

Buy it once and stop looking. A dual boiler machine, a single-dose grinder, and a scale that fits the drip tray.

About €5,124Median of the shops we list, checked 4 to 18 November 2026

Makes
Espresso and milk drinks
Per brew
Many in a row
Time
About 4 minutes a drink
Learning curve
A few months

picked this kit from 27 sources, then priced it from 17 shop prices. We haven't tested it.

Every piece has a shop link for Czechia and Slovakia, Germany, Poland, Norway, and Denmark. In the other countries on our list, at least one piece has no shop yet.

What it costs

What each piece of the Endgame espresso setup costs
JobGearPriceRangeBased on
GrindTimemore Sculptor 078SAbout €1,025€1,0251 shop price
Pull shotsLa Marzocco Linea MicraAbout €3,790€3,388–4,0517 shop prices
WeighAcaia LunarAbout €309€280–3309 shop prices
Total3 piecesAbout €5,124€4,693–5,40617 shop prices
With the cheaper picksTimemore Sculptor 064S, Lelit Bianca V3, Timemore Black Mirror Basic 2About €2,970
With the upgradesWeber Workshops Key Mk.2About €6,304

What’s in the kit

3 pieces, in the order you use them. Each price is the median of the shops we list, so one odd listing can’t move it, or the maker’s price when we have no shop price.

  1. Timemore Sculptor 078S coffee grinder

    Grind

    Timemore Sculptor 078S

    Single-dose 78 mm flat burrs for espresso and filter, with 0.1 g retained.

    About €1,025Median of 1 shop price, checked 18 November 2026

  2. La Marzocco Linea Micra espresso machine in black, three-quarter view

    Pull shots

    La Marzocco Linea Micra

    Two boilers, so a shot and steamed milk happen together. A 5-minute heat-up.

    About €3,790Median of 7 shop prices, checked 4 to 18 November 2026

  3. Acaia Lunar espresso scale in black, viewed from above

    Weigh

    Acaia Lunar

    Small enough for the drip tray, and its timer starts on the first drop.

    About €309Median of 9 shop prices, checked 4 to 18 November 2026

What goes in an endgame espresso setup?

An endgame espresso setup is the one you stop upgrading. For us that means a dual boiler machine, a large flat-burr single-dose grinder, and a scale that fits the drip tray. Past this point you're paying for build and feel more than for taste, so buy it only if you'll use it every day.

Who should skip this kit

  • Pro:Brews and steams at the same time.
  • Pro:A single-dose grinder that leaves almost nothing inside.
  • Pro:A small footprint for a dual boiler.
  • Pro:Fast heat-up from a cold start.
  • Con:Skip it if you drink one shot a day, or you're still learning.
  • Con:A cheaper setup tastes close to this one.
  • Con:The price is very high.
  • Con:Low cup clearance, so a scale on the drip tray is a tight fit.

Take the Gaggia Classic E24 espresso setup, or the Espresso setup for milk drinks for a dual boiler for less.

Not sure it fits? Our coffee setup finder builds a setup from your own answers. See its pick for Latte, Over €2,500.

Why this setup

A machine that doesn't need a wait
  • The Micra has one boiler for brewing and one for steam, so the second flat white doesn't wait for the first.
A grinder that leaves nothing behind
  • The 078S is a single-dose grinder with big flat burrs.
  • Kaffeemacher measured 0.1 g retained, so changing beans costs you almost nothing.
Small parts that fit the machine
  • The Lunar is small enough for the drip tray and starts timing on the first drop.
  • The Micra has little room under the spout, so check your cups against it.

Endgame espresso setup against the usual first buys

Endgame espresso setup compared with the usual first buys
Gaggia Classic E24 espresso setupEspresso setup for milk drinksEndgame espresso setup
Shot and milk togetherNo, shot then milkYesYes, two boilers
GrinderStepless, hopperSingle dose, conicalSingle dose, 78 mm flat burrs
Counter spaceSmallMedium to largeSmall for a dual boiler
Best forKeeping it simpleSeveral drinks for far lessBuy once and stop looking

What to leave out

  • A plumbed-in water line. The maker says plumbing is optional. Refill the 2-litre tank until that becomes a chore.
  • A second grinder. The 078S makes espresso and filter. One grinder covers both.
  • A scale with a big platform. The Micra has low cup clearance, so a drip-tray scale is the one that fits.
  • This costs several times more than the Gaggia Classic E24 espresso setup. Past a point you're paying for build and feel, not taste.
  • Owners report that the 078S needs a lot of beans to season, and its espresso range on the dial is narrow. Expect a few bags before it settles.
  • Low cup clearance on the Micra. Measure your cups against the scale before you buy.
  • The kit has no milk pitcher. A steel pitcher sized for one drink is enough.

Upgrade path

Your first recipe

A flat white, step by step. Start the milk while the shot runs. The overlap is the reason you buy a dual boiler.

  1. Recipe:
    Coffee
    18 g
    Out
    38 g
    Ratio
    1:2.1
    Grind
    Fine
    Time
    27–32 s
    Milk
    150 ml, steamed to about 60 °C
  2. 1Switch the machine on a few minutes early so the group is fully hot.
  3. 2Weigh 18 g of beans, grind them fine, then level and tamp flat.
  4. 3Set the cup on the scale under the spout and tare.
  5. 4Start the shot and aim for 38 g in about 30 seconds.
  6. 5While it runs, purge the steam wand and dip the tip just under the surface of cold milk. Stretch for a few seconds until it sounds like paper tearing.
  7. 6Sink the tip a little deeper and let the milk spin until the jug is too hot to hold, around 60 °C.
  8. 7Tap and swirl the jug until the milk shines, then pour into the middle of the shot.

Coffee to start with

Coffee that suits this kit, and why. For coffee from roasters in your country, see Coffee.

Questions

Sources

We read the maker pages for every spec and went through owner reports from months of daily use. These are the pages behind each pro and con, so you can check any of them yourself.

Other kits