Skip to content

KINGrinder K6 vs Comandante C40: which to buy for espresso and pour-over

The K6 has a numbered outer ring at 16 µm a click, and everyone we read who used both found it grinds faster. The C40 has counted clicks under the grinder. Owners of both split on the cup.

Written by
Updated
Facts checked
Read
10 min · 40 sources
  1. KINGrinder K6 hand grinder

    KINGrinder Grinder

    K6

  2. Comandante C40 MK4 Nitro Blade hand grinder in black

    Comandante Grinder

    C40 MK4 Nitro Blade

Short answer

Should you buy the KINGrinder K6 or the Comandante C40?

Buy the K6 if you switch between espresso and pour-over and want to spend less. Its numbered outer ring moves 16 µm a click. Buy the C40 MK4 for pour-over at one setting, or if you need a grinder now. On 1 November 2026 the C40 was in stock at Czech shops, and the K6 wasn't. Owners of both split on the cup.

K6 vs C40 at a glance

Both are hand grinders with heptagonal stainless steel burrs, and both makers give settings from Turkish coffee to French press. KINGrinder's manual runs from 20 clicks for Turkish coffee to 120 for French press. Comandante's FAQ runs from 3–8 clicks for ibrik to 25–35 for French press. KINGrinder lists a 48 mm burr for the K6. Comandante doesn't print the size of the C40 burr.

They differ most in the dial. The K6 has a numbered ring on the outside. The C40 has an unmarked dial under the burr, and you count clicks from zero.

Specifications: KINGrinder K6, Comandante C40 MK4 Nitro Blade
K6C40 MK4 Nitro Blade
BrewingBoth. Espresso and pour-over.Both. From coarse hand brewing to espresso and cezve.
DriveHandHand
Burr geometryHeptagonal stainless conical burr, for espresso and pour-overHeptagonal conical Nitro Blade
Burr diameter48 mmThe maker has not published this.
Burr materialStainless steelHigh-alloyed high-nitrogen Nitro Blade stainless steel
AdjustmentExternal numbered ringInternal clicks. A three-legged dial under the grinder.
Per click16 µmThe maker has not published this.
Adjustment range60 clicks per round, 10 clicks per numberNo separate span. Internal clicks. A three-legged dial under the grinder.
DosingHand cupHand cup
CapacityThe maker has not published this.The bean jar holds at least 40 g
Weight630 gThe maker has not published this.
Maker price£99€259

Grind adjustment: 16 µm a click vs counted clicks

The K6 shows its grind setting on the ring, and the C40 makes you count. KINGrinder lists 16 µm a click and 60 clicks in one turn. Comandante prints no step size and no clicks per turn. Two reviewers count 12 clicks in one turn of the C40 dial. One of them, Alternative Brewing, is a shop that sells Comandante.

Each maker gives its brews as clicks from zero. KINGrinder's manual starts espresso at 40 clicks and pour-over at 100. Comandante starts espresso at 7–13 clicks and pour-over at 18–35. Moka pot is 65 clicks on the K6, shared with AeroPress, and 14–20 on the C40.

A click isn't the same size on both, so the counts don't convert one to one. What a click does to a shot shows the gap better. Espresso Hackers says one K6 click moves his shot 3–4 seconds. Daddy Got Coffee says one stock C40 click moves his shot 8–12 seconds, and calls that too coarse to dial in a great shot. A shop sent him that C40. They pulled different shots, so the two numbers don't compare exactly.

Two reviewers put a stock C40 click at about 30 µm. In Luque's review, the second speaker says it is closer to 43 µm, and a K6 owner on Kaffee-Netz calls a K6 click three to four times finer than a stock C40 click. Comandante doesn't print a figure, so the spec table leaves Per click blank for the C40.

Owners of both name the ring as a reason to reach for the K6. One on r/pourover calls adjusting it "super easy". One on Kaffee-Netz calls it a clear simplification next to counting clicks. Counting matters less if you stay at one setting.

How long does each take to grind a dose?

The K6 is faster in every report we read from someone who used both. Most of those reports used an older C40, so the gap on the MK4 is less certain.

CY timed 20.1 g at a filter setting on both. The K6 took about 35 seconds. His older C40, which he calls version one, took about 55. He says he bought both himself. An owner on r/pourover says his C40 MK3 took twice as long as the K6 to grind the same dose.

The gap grows at espresso settings. CY timed 15 g at about 50 seconds on the K6 and one minute on his older C40. Espresso Hackers timed 18 g on the K6 at 39 seconds, and Brew Coffee Home at about 40. On a C40 MK4, Daddy Got Coffee reports "upwards of 2 minutes" for one shot and doesn't give the dose. My Coffee Show says a C40 espresso may take two minutes or more.

  1. KINGrinder K6

    20.1 g at a filter setting, timed by CY
    about 35 seconds
    15 g for espresso, timed by CY
    about 50 seconds
  2. Comandante C40 MK4 Nitro Blade

    20.1 g at a filter setting, timed by CY
    about 55 seconds, older C40
    15 g for espresso, timed by CY
    60 seconds, older C40

Neither maker lists a grind time, so the spec table leaves Grind speed blank. For one pour-over dose, CY's gap was about 20 seconds. It matters more when you grind espresso, or several doses in a row.

Does the C40 make better pour-over than the K6?

Owners of both don't agree, so the cup doesn't settle it. We haven't tasted either one.

In the Reddit and Kaffee-Netz threads we read, 12 people said they had used both. Four preferred the K6, and one of them had already sold it. Four preferred the C40. Three kept both without naming a winner, and one called them too close to be worth the difference. Most don't name the C40 generation, and at least one owned an MK3.

The owners who preferred the C40 call its cup cleaner, more vibrant, or better once the burrs were seasoned. The owners who preferred the K6 call its cup brighter or clearer.

Reviewers who brewed both side by side split the same way. Daryl Bueno found the same taste profile, with more body and sweetness from the K6 and more clarity from the C40. CY found his older C40 sweeter and clearer once the cups cooled. Espresso Hackers ground the K6 a little coarser and found the cups "extremely similar", then sold his C40. Luque found the hot C40 cup rounder and the cold cups close, and wouldn't recommend the C40 over the K6.

If the cup is your only reason to pay more for the C40, these reports don't give you one.

Which is better for espresso, the K6 or the C40?

The K6, as owners and reviewers report it. It has the smaller step, and it grinds an espresso dose faster. KINGrinder's manual starts espresso at 40 clicks, and says not to turn the handle below 15 clicks, because that could damage the burr. Comandante lists 7–13 clicks for espresso.

Two people who made espresso on both preferred the K6. CY liked the K6 shot better, though he called both shots a little too fine and wanted to retry the C40 one click coarser. On Kaffee-Netz, an owner who moved from the C40 to the K6 found a medium roast easier to dial in and just as good.

Comandante sells the RX35 axle for Red Clix, which it says doubles the adjustment range for every grind size. On 1 November 2026 the axle was €9.90 and in stock. Comandante says to use it only with its red grind dial. The whole Red Clix kit costs more: Espresso Hackers says 40 euro, My Coffee Show says 40 pounds, and Daddy Got Coffee says $50. We didn't find the price of the red dial on its own. With Red Clix, Daddy Got Coffee says one click moves his shot 4–6 seconds. That's still more than the 3–4 seconds Espresso Hackers gets from a K6 click.

If you make espresso every day, buy the K6. If you make pour-over most days and espresso now and then, the C40 with Red Clix narrows the gap for the price of the kit.

What owners say about the K6 and C40

Owners praise the K6's grind for its price and its outer dial, and the C40's filter cup and build. They complain about the K6's zero and grip sleeve, and the C40's speed and coarse stock clicks for espresso. Each row below links the owner reports it comes from.

  1. KINGrinder K6

  2. Comandante C40 MK4 Nitro Blade

Owner reports from each Gear record, with their sources. We didn't test these grinders.

The threads we read add to two rows. Brew Coffee Home couldn't set his K6 back to zero after taking it apart, which fits the row on the zero mark. One K6 owner on r/pourover says the silicone sleeve loosens and slips a little, but doesn't come off.

Three C40 owners on r/pourover complain about static. Two say grounds stick to the catch cup, and one of those had an MK3.

Price, warranty, and where to buy in Europe

On 1 November 2026 the C40 was easy to buy in Europe, and the K6 wasn't.

KINGrinder listed the K6 at £99 on its own store, with every option out of stock. Its shop list names no Czech, Slovak, or other EU shop. Kofio, the one Czech shop we found that lists the K6, had it sold out. The other shops we searched in Czechia, Germany, and the Netherlands showed no K6, though the GourmetKava and Uprazeno searches returned empty pages we can't read as a clear no. Gear Detail links an Amazon.de listing for the K6, and we couldn't open it that day.

Comandante listed the C40 at €259 with VAT, out of stock. Shops sold it for less. In Germany, espressissimo listed it at €199 with VAT, down from €249, in stock. In the Netherlands, Van Pommeren listed it at €225 with VAT, in stock.

In Czechia, Alza listed the C40 at 5 999 Kč with VAT, in stock. KAVA.CZ listed it at 5 590 Kč with VAT, to ship within a week. Pražírna Ignác listed it at 6 599 Kč with VAT, available in 1–2 days.

Comandante's terms give shipping rates for Germany and Austria, and price other countries one by one by weight. espressissimo, Kofio, KAVA.CZ, and Pražírna Ignác ship to Czechia and Slovakia. Van Pommeren's shipping rates don't name either country. Pick where you ship to below to see the shops that sell each grinder there. We don't sell them.

KINGrinder's product page and manual print no warranty for the K6. Comandante prints no warranty length either. It says to contact your local dealer or Comandante if something goes wrong. Comandante says its Nitro Blade burr will last a lifetime. KINGrinder prints no burr life for the K6.

Want a whole setup around it? This kit is built on its gear: Home latte setup on a budget. Or our coffee setup finder builds one from your answers.

Which should you buy?

Buy the K6 for espresso, for switching brews, or to spend less. Buy the C40 for pour-over at one setting, or when you need the grinder this week.

  1. KINGrinder K6

    • Pick:Choose it if you make espresso or switch brews, and want to read the setting off the dial for the least money.
    • Pro:Each click moves 16 µm, and the ring shows the setting.
    • Pro:KINGrinder listed it at £99 on 1 November 2026.
    • Pro:Everyone we read who used both found it grinds a dose faster.
    • Con:Skip it if you need a grinder soon from a Czech shop, or want the grinder owners call better made.
  2. Comandante C40 MK4 Nitro Blade

    • Pick:Choose it if you brew pour-over most days, don't mind counting clicks, and want a grinder a shop has in stock.
    • Pro:On 1 November 2026, espressissimo listed it at €199, in stock, and ships to Czechia and Slovakia.
    • Pro:It has two 40 g bean jars, one glass and one polymer, and it's made in Germany.
    • Pro:Owners praise its filter cup, but owners of both split on whether it beats the K6.
    • Con:Skip it if you make espresso every day or switch brews often.

To weigh the K6 against a 1Zpresso, read K6 vs K-Ultra. To weigh the C40 against the K-Ultra, read K-Ultra vs Comandante C40.

K6 and C40 questions

Sources

View all 40 sources